Rust Inhibitor - Company Ranking(44 companyies in total)
Last Updated： Aggregation Period:Jul 23, 2025〜Aug 19, 2025
This ranking is based on the number of page views on our site.
Display Company Information
| Company Name | Featured Products | ||
|---|---|---|---|
| Product Image, Product Name, Price Range | overview | Application/Performance example | |
| 【Packaging】 ■18L can 【Coverage Area】 ■Approximately 10m2 per 1L; one can (18L) covers about 450 pieces (D25, L5m) 【Instructions for Use】 ■Remove oil, moisture, and dirt from the rebar, then apply the undiluted solution with a brush or roller. (Dipping is possible) ■It dries quickly and forms a thin film. *It takes 30 to 40 minutes to become touch-dry. Avoid rain during this time. | 【Usage Precautions】 ■ Ensure good ventilation during work and keep away from fire. ■ Since it is volatile, use it in small amounts as needed. ■ Always close the lid of the can during use. ■ It takes 30 to 40 minutes to become touch-dry and harden. Avoid rain and other moisture during this time. ■ Do not mix with other solvents or oils. ■ Wear a respirator, goggles, and oil-resistant gloves. ■ Do not store in high-temperature areas. ■ When disposing, entrust to an industrial waste disposal contractor authorized by the prefectural governor. ■ No open flames (Class 4, Type 1 petroleum) (Type 2 solvent). ■ For other precautions, please check the SDS (Safety Data Sheet). | ||
| 【Packaging】 ■18L can 【Coverage Area】 ■Approximately 10m² per 1L 【Instructions for Use】 ■Before use, remove oil, moisture, dirt, and rust from the surface. ■You can use a spray, brush, roller, or dipping method. ■When using a mold coated with FG-300, wipe off the film with a cloth soaked in kerosene or light oil. | 【Usage Precautions】 ■ Do not use on rebar. ■ After use, be sure to seal tightly to avoid moisture and contamination. ■ Avoid inhaling mist or direct contact as much as possible. ■ Wear a respirator, goggles, and oil-resistant gloves as necessary. ■ Store in a cool, dark place with good ventilation. ■ When disposing, entrust to an industrial waste disposal contractor with permission from the prefectural governor. (Class 4, Type 2 petroleum products; no open flames allowed) ■ For other precautions, please refer to the SDS (Safety Data Sheet). | ||
|
---
--- |
--- | ||
TOAシブル
-
- Featured Products
-
NETIS registered product: Rust preventive agent for rebar "Samtech Super Sabicon"
- overview
- 【Packaging】 ■18L can 【Coverage Area】 ■Approximately 10m2 per 1L; one can (18L) covers about 450 pieces (D25, L5m) 【Instructions for Use】 ■Remove oil, moisture, and dirt from the rebar, then apply the undiluted solution with a brush or roller. (Dipping is possible) ■It dries quickly and forms a thin film. *It takes 30 to 40 minutes to become touch-dry. Avoid rain during this time.
- Application/Performance example
- 【Usage Precautions】 ■ Ensure good ventilation during work and keep away from fire. ■ Since it is volatile, use it in small amounts as needed. ■ Always close the lid of the can during use. ■ It takes 30 to 40 minutes to become touch-dry and harden. Avoid rain and other moisture during this time. ■ Do not mix with other solvents or oils. ■ Wear a respirator, goggles, and oil-resistant gloves. ■ Do not store in high-temperature areas. ■ When disposing, entrust to an industrial waste disposal contractor authorized by the prefectural governor. ■ No open flames (Class 4, Type 1 petroleum) (Type 2 solvent). ■ For other precautions, please check the SDS (Safety Data Sheet).
Long-term rust prevention agent for steel products "Samtech FG-300"
- overview
- 【Packaging】 ■18L can 【Coverage Area】 ■Approximately 10m² per 1L 【Instructions for Use】 ■Before use, remove oil, moisture, dirt, and rust from the surface. ■You can use a spray, brush, roller, or dipping method. ■When using a mold coated with FG-300, wipe off the film with a cloth soaked in kerosene or light oil.
- Application/Performance example
- 【Usage Precautions】 ■ Do not use on rebar. ■ After use, be sure to seal tightly to avoid moisture and contamination. ■ Avoid inhaling mist or direct contact as much as possible. ■ Wear a respirator, goggles, and oil-resistant gloves as necessary. ■ Store in a cool, dark place with good ventilation. ■ When disposing, entrust to an industrial waste disposal contractor with permission from the prefectural governor. (Class 4, Type 2 petroleum products; no open flames allowed) ■ For other precautions, please refer to the SDS (Safety Data Sheet).
-
TOAシブル
Membership (free) is required to view all content.
Already a Member? Log In Here
